Mechanical Evaluation of Timber Conservation Processes by Bending Tests

Abstract:

This paper presents the laboratory work performed with the purpose of understanding the mechanical performance of 340x20x20 mm maritime pine wood samples degraded by rot fungi when treated with a biocide product followed by consolidation through impregnation with a polymeric product.Four commercially available products were used: a water-based biocide, BC, a solvent-based biocide, X, an acrylic consolidant, PB (PB 72), and an epoxy-based consolidant, E.Seven sets of specimens each one having a varied range of fungal degradation were prepared. Then the product combinations were applied by brush to six sets of specimens (E, X-E, BC-E, PB, X-PB, BC-PB) of which one was left untreated for control, 0-0. Finally all sets were subjected to static bending strength test until rupture.Results showed that the acrylic and epoxy-based products lead to increased mechanical capacity of the consolidated wood up to 100% in some cases in specimens with 70% of MOE loss. The results presented the same order of magnitude for both wood consolidants. The previous application of biocide did not have a significant impact in the behavioral pattern of the consolidant: a marked improvement of the bending strength of the degraded specimens after treatment and consolidation. These results demonstrated the feasibility of combining biocide/consolidation products, and provide indications of interest to the application of this technique to extend the lifespan of wood elements moderately degraded by fungi in old buildings.

• Periodical: Advanced Materials Research (Volume 778)
• Pages: 612-619
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.778.612
• Online since: September 2013
• Authors: Dulce Franco Henriques, Lina Nunes, Jorge de Brito
• Keywords: Conservation, Consolidation, Degradation, Old Buildings, Wood

References

[1] A. Unger, W. Unger, Conservation of wooden cultural property, Proceedings of The International Research Group on Wood Preservation, IRG/WP 94-30038, Bali, Indonesia, (1994).

[2] T. Highley, Biodeterioration of wood, Wood handbook - Wood as an engineering material, Gen. Tech. Rep. FPL–GTR–113, Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, U.S.A., (1999).

DOI: 10.2737/fpl-gtr-113

[3] R.W. Berry, Remedial treatment of wood rot and insect attack in buildings, Building Research Establishment, Garston, Watford, (1994).

[4] K.E. Larsen, N. Marstein, Conservation of historic timber structures - An ecological approach. Butterworth-Heinemann Edit., Reed Elsevier plc group, United Kingdom, (2000).

[5] P. Lavisci, S. Beri, B. Pizzo, P. Triboulot, R. Zanuttini, A shear test for structural adhesives used in the consolidation of old timber, Holz als Roh - Werkstoff 59 (2001) 145-152.

DOI: 10.1007/s001070050486

[6] A.F. Preston, Wood preservation – Trends of today that will influence the industry tomorrow, Forest Products Journal, 50(9) (2000) 12-19.

[7] S.M. Nakhla, A comparative study of resins for the consolidation of wooden objects, Studies in Conservation, 31 (1986), 38-44.

DOI: 10.1179/sic.1986.31.1.38

[8] J. -D. Gu, Microbiological deterioration and degradation of synthetic polymeric materials: recent research advances, International Biodeterioration & Biodegradation, 52 (2003) 69-91.

DOI: 10.1016/s0964-8305(02)00177-4

[9] D. Henriques, et al., Consolidating preservative-treated wood: Combined mechanical performance of boron and polymeric products in wood degraded by Coniophora puteana, Journal of Cultural Heritage (2013).

DOI: 10.1016/j.culher.2012.11.008

[10] European Standard EN113 Wood preservatives - Test method for determining the protective effectiveness against wood destroying basidiomycetes - Determination of the toxic values, European Committee for Standardization, Brussels, (1980).

DOI: 10.3403/2604290

[11] Norma Portuguesa NP619 Static bending test (in Portuguese). IGPAI, Lisbon, Portugal, (1973).

[12] British Standard BS 15083-2, Durability of wood and wood-based products - Determination of the natural durability of solid wood against wood-destroying fungi, test methods - Part 2: Soft rotting micro-fungi. British standards, United Kingdom, (2005).

DOI: 10.3403/30088645

[13] C.R. Coggins, Trends in timber preservation - A global perspective, Journal of Tropical Science, 20(4), (2008), pp.264-272.

[14] F.C. Jorge, L. Nunes, C. Botelho, Boron in wood preservation: problems, challenges and proposed solutions. An overview on recent research. Journal of the Faculty Science Technology, University Fernando Pessoa 1 (2004) 3-15.

[15] D.F. Henriques, L. Nunes, J. de Brito, Development of a penetration test for timber impregnation products for use in old buildings, Construction and Building Materials 24 (7) (2010) 1095-1100.

DOI: 10.1016/j.conbuildmat.2009.12.034

[16] M.E. Weaver, Conserving Buildings - A Manual of Techniques and Materials, Preservation press. John Wiley & Sons, Inc. USA, (1997).

[17] G.M. Crisci, M.F. La Russa, M. Malagodi, S.A. Ruffolo, Consolidating properties of Regalrez 1126 and Paraloid B72 applied to wood, Journal of Cultural Heritage, 11 (2010) 304-308.

DOI: 10.1016/j.culher.2009.12.001

[18] D.F. Henriques, L. Nunes, J. de Brito, Consolidation of timber degraded by fungi in buildings: an experimental approach, proceedings of CIB World Congress 2010, University of Salford, The Lowry, (2010).

[19] E. Lehmann, S. Hartmann, P. Wyer, Neutron radiography as visualization and quantification method for conservation measures of wood firmness enhancement, Nuclear Instruments and Methods in Physics Research A 542 (2005) 87–94.

DOI: 10.1016/j.nima.2005.01.016

[20] J.M.G. Nero, A.P. Duarte, J.C. Bordado, Principles for understanding timber impregnation, Evaluation of the efficiency of impregnation (in Portuguese), Proceedings of 1st Iberian Congress Timber in Construction, Minho University, Guimarães, Portugal, 2004, pp.425-436.